-
How to maintain LCD in Shenzhen?
A protective film is pasted on the finished table of the installed module to prevent the customer from tarnishing the surface of the display screen during assembly. The customer shall not tear it off before the assembly of the whole machine to avoid soiling or damaging the surface of the LCD screen. In case of defective products, the protective film shall still be pasted back after disassembly to prevent scratching the LCD surface.
2021-12-03 -
Introduction to the composition of 7-inch LCD scre
LCD control panel is often called glass. It is the main key component of LCD information touch group. The quality of the display mainly means to see the quality of the LCD control panel, which will directly affect the sensory experience of the picture. LCD control panel is generally a large board, which is cut into small boards according to different sizes and becomes a key component.
2021-11-23 -
Comparison between industrial LCD and ordinary LCD
The differences between industrial LCD and ordinary LCD. At present, the power consumption of LCD has been very low, so it has been favored in many use processes, and is widely used in various precision and long-time electronic devices. The shape and structure of this industrial LCD panel are very similar to ordinary LCD panels. So, why is there any difference between industrial LCD and ordinary LCD?
2021-11-10 -
Application of 10.1-inch screen in medical industr
0.1-inch medical display screen is widely used in the whole medical industry, including endoscope, saliva analyzer, patient monitor, ultrasonic instrument, X-ray equipment and other medical instruments. It can also be seen in laparoscopy, hysteroscopy, thoracoscopy and other camera systems and digital operating rooms.
2021-10-23 -
Which parts of LCD screen are easy to be damaged?
Although the structure of LCD screen is relatively complex, some parts have a long service life, while some parts have a relatively short service life and high vulnerability rate. If the display is found to be faulty, the first thing to do is to check these parts and judge which part is damaged according to the fault condition fed back by the display.
2021-10-10 -
How to fix the broken LCD screen? Yuhua micro tech
1. Turn off the power and take out the battery. First remove the screw in front of the computer screen, and then open it to take down the broken screen. 2. Pay attention to the slot on the back of the screen and be careful when pulling it out. Tear off the adhesive tape first and then pull it. Be careful not to pull it off where there is a thread end. Check the back of the screen, which will indicate the model. For example, led140 / 170 represents 14 / 17 inch screen.
2021-09-26 -
8-inch LCD screen features and application industr
8-inch LCD is generally used in health care, face recognition, smart home, industry flat panel, industrial control equipment, intelligent robot, charging pile and other terminal applications. 8-inch LCD can be selected. Its characteristics are wide application in the industry, high resolution, clear display, wide temperature, high brightness and other characteristics. It is a LCD widely used in the display industry at present.
2021-09-26 -
What are the application fields of 8-inch LCD?
With the rapid development of the interconnection of all things, more and more intelligent products appear in our vision, which also drives many component manufacturers, including LCD manufacturers. As the core component of many intelligent terminal products, LCD plays the role of the control center of the whole equipment, and its importance is obvious to all.
2021-09-13
